Heres an in action shot the piece being milled is aluminium i dont know much more no speed or feeds the cutter is a homemade one ~80mm

And some movies offcourse, this is it drilling aluminium wuth a 6mm drill. The frame is only tacked togheter and if you look closely you can see all the deflextion as the drill goes thru.

Heres the movie the above picture is from.

Milling steel for the first time, 6, 8 or 10 mm cutter rpm is high and feed is low its 0.5mm per pass fullwidth.

Moving one axis to the end and back, i found the indicator in a trashcan so it might not be to accurate :)

My most recent picture of the mill, the clamp holds down the belt tensioner for the spindle still havent fixed that.

Moving it to the table, it weights quite alot.

Poured some concrete into the table, the holes are for screws and the white tank is for coolant.

Table built for the mill.

Stepper is mounted.

Housing for 2 angular contact ball bearings.

Machining the end of the ballscrew.