It aint easy to get everything aligned right with just 2 hands but i keep working on the frame.

Mounted on rubber the frame not sits on the stand.

The brushed servo i will be using for the x axis, i will probably buy another one for the y axis and z will be driven by a stepper motor.

150W

3000RPM

Painted the underside of the frame his will not be that easy to get to from now on.

Started to machine the steel pipe that the x axis rails and screws will mount to. The rails have mounting holes every 150mm(poorly spaced), im doubling that with 2 bolts every 75mm. These are 2000mm long that should mean around 50 holes per rail

Painted the stand, i wanted another color for it all but with my budget only black and white was available or a mix of the 2. :)

Heres the linear rails im going to use.

I bought mine from Zapp automation this time and they arrived very scuffed up  but more about that later in a topic of its own. The trucks i bought directly from the factory and they appear to be of good quality and ok.

Tada, bottoms done needs to be fully welded.